Please note the following items before viewing the drawings

■ All units described in this drawing are shown in millimeters.
■ Please note that the sash may be wire-reinforced glass, wire-reinforced glass or molded glass according to the Building Standards Law.
■ Please note that the shapes of pillars, beams, ceilings, etc. may differ depending on the floor.
■ Since the exclusive area is calculated by the wall core calculation by the Building Standard Law, the area of MB (meter box) and PS (pipe space) is included. In addition, MB (meter box) and PS (pipe space) are not included in the registered area calculated by internal law calculation.
■ All areas are calculated by wall core calculation, and each area after the third decimal place is rounded down.
■ Regarding the display of the number of tatami mats in the living room, 1 tatami mat = 1.62 m2 is converted, and the numbers after the second decimal place are rounded down.
■ Please note that the design, specifications, exterior, etc. may change due to construction reasons.
■ For each type, the shape of the columns and beams may differ slightly depending on the floor.
■ The scales and orientations shown may differ slightly during the tracing and printing process, so please check the design documents for details.
■ Depending on the type, a handrail may be attached to the window inside the dwelling unit. (Handrails may be installed on the waist window facing the outer wall)
■ The position of the heat insulating material may differ depending on the type and number of floors.
■ The equipment code may differ slightly from the actual mounting position.
■ The shape and thickness of the window may differ.
■ Please note that if the current situation is different from the drawing, the current situation will be prioritized.
■ Those who purchase and install home appliances, furniture, etc., please consider after actual measurement before moving in.
■ LDK = Living / Dining / Kitchen.